HS code / TARIC details
8708509910 - Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
-|of a length of| 1|m or more but not more than 2|m,
-|of a weight of 6|kg or more but not more than 9|kg
Definition & language versions
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
-|of a length of| 1|m or more but not more than 2|m,
-|of a weight of 6|kg or more but not more than 9|kg
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
碳纤维增强塑料传动轴,一体式无中间接头,长1-2米,重6-9千克
DE
einteilige mittelgelenklose Antriebswelle aus kohlenstofffaserverstärktem Kunststoff mit
-|einer Länge von 1|m oder mehr, jedoch nicht mehr als 2|m,
-|einem Gewicht von 6|kg oder mehr, jedoch nicht mehr als 9|kg
EN
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
-|of a length of| 1|m or more but not more than 2|m,
-|of a weight of 6|kg or more but not more than 9|kg
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
87085099 10
CN (8 digits)
87085099
HS (6 digits)
870850
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Fri Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 2Country-scoped: 0With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Fri Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Supplementary unit import
110
All origins (erga omnes)
NAR
Sat Jan 01 - -
Regulation 2278/21
Declaration of subheading submitted to legal restrictions (net weight/supplementary unit)
482
All origins (erga omnes)
Cond: R 9.001/KGM(10):; R 6.000/KGM(28):; R 0.000/KGM(10):
Sat Jan 01 - -
Regulation 2278/21
Siblings
8708509925
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67,0 mm or more but not more than 84,5 mm,
-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,
- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708509935
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,
- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,
- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and
- with a grease compartment,
- capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708509940
Double flange bearing of 3rd generation, for motor vehicles,
-|with double-row ball bearing,
-|whether or not with impulse (encoder) ring,
-|whether or not with antilock brake system (ABS) sensor,
-|whether or not with mounted screws,
for use in the manufacture of goods of chapter 87
8708509945
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,
-forged, turned, milled and hardened
8708509950
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67,0 mm or more but not more than 99,0 mm,
-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened
8708509960
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
-forged, turned, broached and hardened
8708509970
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708509990
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
einteilige mittelgelenklose Antriebswelle aus kohlenstofffaserverstärktem Kunststoff mit -|einer Länge von 1|m oder mehr
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.