HS code / TARIC details
8501510000 - Of an output not exceeding 750|W
Definition & language versions
Of an output not exceeding 750|W
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
输出功率不超过750瓦
DE
mit einer Leistung von 750|W oder weniger
EN
Of an output not exceeding 750|W
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85015100 00
CN (8 digits)
85015100
HS (6 digits)
850151
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Sat Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 2Country-scoped: 2With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Sat Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Tariff preference
142
Mercosur
0.000 %
Fri May 01 - -
Decision 0183/26
Tariff preference
142
Japan
0.000 %
Sat Feb 01 - -
Decision 1907/18
Related codes
Children
8501510010 Of an output exceeding|735|W, for use in civil aircraft8501510020 Of an output of less than 750|W, for use in certain types of aircraft8501510025 Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510030 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With:
- an output of 340W or more but not more than 7,4kW,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm8501510035 Electric permanent magnet synchronous motor with:
-an output power of 600 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the diameter 59,2 mm and separated by an angle 30,0°,
-a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process,
-a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface,
-a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental),
-a cogging torque of no more than 12 mNm,
-a friction torque in ambient temperature of no more than 23 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510040 Electric AC motor, three-phase, with:
-a rated power of 280 W or more but not more than 320 W,
-an output power of 480 W or more but not more than 540 W,
-an input power of 800 W or more but not more than 900 W,
-an external diameter of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,
-a weight of 6 kg or more but not more than 6,4 kg,
-a pulley and a tachometer,
for use in the manufacture of home appliance products8501510045 Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 400 W or more but not more than 750 W (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor8501510050 Three phase AC synchronous brushless permanent magnet motor with:
-an output of 500 W or more but not more than 700 W,
-an external diameter of 129,7 mm or more but not more than 180,3 mm,
-a rated speed of 16 000 rpm or more but not more than 17 000 rpm,
-a weight of 2,5 kg or more but not more than 3,1 kg, and
-with a pulley,
for use in the manufacture of home appliance products8501510090 Other
Declarable leaf codes
8501510010 Of an output exceeding|735|W, for use in civil aircraft8501510020 Of an output of less than 750|W, for use in certain types of aircraft8501510025 Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510030 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With:
- an output of 340W or more but not more than 7,4kW,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm8501510035 Electric permanent magnet synchronous motor with:
-an output power of 600 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the diameter 59,2 mm and separated by an angle 30,0°,
-a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process,
-a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface,
-a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental),
-a cogging torque of no more than 12 mNm,
-a friction torque in ambient temperature of no more than 23 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510040 Electric AC motor, three-phase, with:
-a rated power of 280 W or more but not more than 320 W,
-an output power of 480 W or more but not more than 540 W,
-an input power of 800 W or more but not more than 900 W,
-an external diameter of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,
-a weight of 6 kg or more but not more than 6,4 kg,
-a pulley and a tachometer,
for use in the manufacture of home appliance products8501510045 Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 400 W or more but not more than 750 W (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor8501510050 Three phase AC synchronous brushless permanent magnet motor with:
-an output of 500 W or more but not more than 700 W,
-an external diameter of 129,7 mm or more but not more than 180,3 mm,
-a rated speed of 16 000 rpm or more but not more than 17 000 rpm,
-a weight of 2,5 kg or more but not more than 3,1 kg, and
-with a pulley,
for use in the manufacture of home appliance products8501510090 Other
Siblings
8501100000
Motors of an output not exceeding 37,5|W
8501200000
Universal AC/DC motors of an output exceeding 37,5|W
8501310000
Of an output not exceeding 750|W
8501320000
Of an output exceeding 750|W but not exceeding 75|kW
8501330000
Of an output exceeding 75|kW but not exceeding 375|kW
8501340000
Of an output exceeding 375|kW
8501400000
Other AC motors, single-phase
8501520000
Of an output exceeding 750|W but not exceeding 75|kW
8501530000
Of an output exceeding 75|kW
8501610000
Of an output not exceeding 75|kVA
8501620000
Of an output exceeding 75|kVA but not exceeding 375|kVA
8501630000
Of an output exceeding 375|kVA but not exceeding 750|kVA
8501640000
Of an output exceeding 750|kVA
8501710000
Of an output not exceeding 50|W
8501720000
Of an output exceeding 50|W
8501800000
Photovoltaic AC generators
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
mit einer Leistung von 750|W oder weniger
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.