HS code / TARIC details
8501310000 - Of an output not exceeding 750|W
Definition & language versions
Of an output not exceeding 750|W
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
输出功率不超过750瓦
DE
mit einer Leistung von 750|W oder weniger
EN
Of an output not exceeding 750|W
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85013100 00
CN (8 digits)
85013100
HS (6 digits)
850131
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Sat Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 3Country-scoped: 3With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Sat Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Tariff preference
142
Mercosur
0.000 %
Fri May 01 - -
Decision 0183/26
Tariff preference
142
Japan
0.000 %
Sat Feb 01 - -
Decision 1907/18
Import control on restricted goods and technologies
711
North Korea (Democratic People’s Republic of Korea)
Cond: Y cert: Y-920 (29):; Y (09):
Fri Sep 01 - -
Regulation 1509/17
Related codes
Children
8501310010 Motors of an output exceeding|735|W, DC generators, for use in civil aircraft8501310020 For use in certain types of aircraft8501310045 Other8501310047 Motor for automotive electric seat adjustment applications:
-with a shaft output on both motor sides,
-consisting of a permanently excited DC motor,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 120 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501310048 Brushless DC electric motors:
-with a rated power of 240 W or more, but not more than 260 W,
-with a voltage of 36 V or higher, but not higher than 52 V
-with a torque of 20 Nm or more, but not more than 140 Nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the LIN or UART interface,
-weighing 1,5 kg or more, but not more than 5,0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes8501310049 Brushless DC electric motors:
- with a rated power of 240 W or more, but not more than 260 W,
- with a voltage of 24 V or higher, but not higher than 52 V,
- with a torque of 30 Nm or more, but not more than 62 Nm,
- with a LIN, UART or CAN communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1,5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes8501310050 DC motors, brushless, with:|
-|an external diameter of 80|mm or more, but not more than 200|mm,
-|a supply voltage of 4|V or more, but not more than 16|V,
-|an output at 20|°C of 200|W or more, but not more than 750|W,
-|a torque at 20|°C of 2,00|Nm or more, but not more than 7,00|Nm,
-|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm,
-|with or without a pulley,
- with or without an electronic power steering sensor/controller8501310052 Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with:
-a three-phase winding,
-an output power not exceeding 280 W,
-a length with gearhead of 116,1 mm or more but not more than 117,2 mm,
-an external diameter of 13,86 mm or more but no more than 13,92 mm,
-a maximum torque of motor with gearhead 246,6 mNm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C,
-a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function8501310054 Brushless DC electric motor, with:
-a rated voltage of 310 V,
-a rated power of 350 W or more but not more than 368 W,
-an input power of 500 W or more but not more than 550 W,
-output power of 350 W or more but not more than 400 W,
-an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2,33 kg or more but not more than 2,40 kg,
-a pulley8501310055 DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24,2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3,6 V or more, but not more than 230 V,
-an output power of more than 37,5 W , but not more than 2400 W,
-a free load current of not more than 20,1 A,
-a maximum efficiency of 50 % or more,8501310056 DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with:
-a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure,
-a CAN-communication interface,
-an external sensor interface,
-operating temperature range of -40℃ to 95℃ or broader,
-compliance with standard IP6K9K for water and dustproofness,
-supply voltage of 9 V or more, but not more than 16 V,
-rated power output of 500 W or more, but not higher than 750 W,
-rated torque of 3 Nm or more, but not more than 6 Nm,
-length of 150 mm or more, but not more than 250 mm,
-width of 100 mm or more, but not more than 150 mm,
-height of 80 mm or more, but not more than 120 mm8501310057 Brushless DC electric motor with LCD control indicator and/or control unit with buttons:
-with an output power of 200 W or more, but not more than 700 W,
-with a supply voltage of 30 V or more, but not more than 60 V,
-with a torque of 30 Nm or more, but not more than 200 Nm,
-with a height of 117 mm or more, but not more than 146 mm,
-with a length of 117 mm or more, but not more than 223 mm,
-with a width of 135 mm or more, but not more than 190 mm,
-with a weight of 2 kg or more but not more than 5 kg,
-designed to be mounted in a frame, front or rear bicycle wheel,
-equipped with sockets, at least for cable connection with LCD control indicator,
for use in the manufacture of electric bicycles8501310058 Permanently excited DC motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 W or more but not more than 400 W, and
-a supply voltage of 9 V or more but not more than 50 V,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture8501310063 Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
- a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor8501310068 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:
-a length of 110 mm or more but not more than 140 mm,
-a width of 90 mm or more but not more than 130 mm,
-a height of 80 mm or more but not more than 110 mm
for use in the manufacture of engines of motor vehicles8501310085 Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a DC motor of an output not exceeding 600 W,
- for usage with a supply voltage of 8 V or more but no more than 48 V,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod8501310099 Other
Declarable leaf codes
8501310010 Motors of an output exceeding|735|W, DC generators, for use in civil aircraft8501310020 For use in certain types of aircraft8501310045 Other8501310047 Motor for automotive electric seat adjustment applications:
-with a shaft output on both motor sides,
-consisting of a permanently excited DC motor,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 120 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501310048 Brushless DC electric motors:
-with a rated power of 240 W or more, but not more than 260 W,
-with a voltage of 36 V or higher, but not higher than 52 V
-with a torque of 20 Nm or more, but not more than 140 Nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the LIN or UART interface,
-weighing 1,5 kg or more, but not more than 5,0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes8501310049 Brushless DC electric motors:
- with a rated power of 240 W or more, but not more than 260 W,
- with a voltage of 24 V or higher, but not higher than 52 V,
- with a torque of 30 Nm or more, but not more than 62 Nm,
- with a LIN, UART or CAN communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1,5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes8501310050 DC motors, brushless, with:|
-|an external diameter of 80|mm or more, but not more than 200|mm,
-|a supply voltage of 4|V or more, but not more than 16|V,
-|an output at 20|°C of 200|W or more, but not more than 750|W,
-|a torque at 20|°C of 2,00|Nm or more, but not more than 7,00|Nm,
-|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm,
-|with or without a pulley,
- with or without an electronic power steering sensor/controller8501310052 Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with:
-a three-phase winding,
-an output power not exceeding 280 W,
-a length with gearhead of 116,1 mm or more but not more than 117,2 mm,
-an external diameter of 13,86 mm or more but no more than 13,92 mm,
-a maximum torque of motor with gearhead 246,6 mNm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C,
-a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function8501310054 Brushless DC electric motor, with:
-a rated voltage of 310 V,
-a rated power of 350 W or more but not more than 368 W,
-an input power of 500 W or more but not more than 550 W,
-output power of 350 W or more but not more than 400 W,
-an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2,33 kg or more but not more than 2,40 kg,
-a pulley8501310055 DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24,2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3,6 V or more, but not more than 230 V,
-an output power of more than 37,5 W , but not more than 2400 W,
-a free load current of not more than 20,1 A,
-a maximum efficiency of 50 % or more,8501310056 DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with:
-a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure,
-a CAN-communication interface,
-an external sensor interface,
-operating temperature range of -40℃ to 95℃ or broader,
-compliance with standard IP6K9K for water and dustproofness,
-supply voltage of 9 V or more, but not more than 16 V,
-rated power output of 500 W or more, but not higher than 750 W,
-rated torque of 3 Nm or more, but not more than 6 Nm,
-length of 150 mm or more, but not more than 250 mm,
-width of 100 mm or more, but not more than 150 mm,
-height of 80 mm or more, but not more than 120 mm8501310057 Brushless DC electric motor with LCD control indicator and/or control unit with buttons:
-with an output power of 200 W or more, but not more than 700 W,
-with a supply voltage of 30 V or more, but not more than 60 V,
-with a torque of 30 Nm or more, but not more than 200 Nm,
-with a height of 117 mm or more, but not more than 146 mm,
-with a length of 117 mm or more, but not more than 223 mm,
-with a width of 135 mm or more, but not more than 190 mm,
-with a weight of 2 kg or more but not more than 5 kg,
-designed to be mounted in a frame, front or rear bicycle wheel,
-equipped with sockets, at least for cable connection with LCD control indicator,
for use in the manufacture of electric bicycles8501310058 Permanently excited DC motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 W or more but not more than 400 W, and
-a supply voltage of 9 V or more but not more than 50 V,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture8501310063 Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
- a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor8501310068 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:
-a length of 110 mm or more but not more than 140 mm,
-a width of 90 mm or more but not more than 130 mm,
-a height of 80 mm or more but not more than 110 mm
for use in the manufacture of engines of motor vehicles8501310085 Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a DC motor of an output not exceeding 600 W,
- for usage with a supply voltage of 8 V or more but no more than 48 V,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod8501310099 Other
Siblings
8501100000
Motors of an output not exceeding 37,5|W
8501200000
Universal AC/DC motors of an output exceeding 37,5|W
8501320000
Of an output exceeding 750|W but not exceeding 75|kW
8501330000
Of an output exceeding 75|kW but not exceeding 375|kW
8501340000
Of an output exceeding 375|kW
8501400000
Other AC motors, single-phase
8501510000
Of an output not exceeding 750|W
8501520000
Of an output exceeding 750|W but not exceeding 75|kW
8501530000
Of an output exceeding 75|kW
8501610000
Of an output not exceeding 75|kVA
8501620000
Of an output exceeding 75|kVA but not exceeding 375|kVA
8501630000
Of an output exceeding 375|kVA but not exceeding 750|kVA
8501640000
Of an output exceeding 750|kVA
8501710000
Of an output not exceeding 50|W
8501720000
Of an output exceeding 50|W
8501800000
Photovoltaic AC generators
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
mit einer Leistung von 750|W oder weniger
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.