HS code / TARIC details
8708999750 - Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:
-internal porosity not more than 1 mm,
-outer porosity not more than 2 mm,
-rockwell hardness HRB 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles
Definition & language versions
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:
-internal porosity not more than 1 mm,
-outer porosity not more than 2 mm,
-rockwell hardness HRB 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
铝制发动机支架,尺寸:高10-200毫米,宽10-250毫米,长10-200毫米,至少两个固定孔,铝合金ENAC-46100或ENAC-42100,内孔隙率≤1毫米,外孔隙率≤2毫米,洛氏硬度HRB≥10,用于机动车发动机悬挂系统生产
DE
Aluminium-Motorhalterung mit
-einer Höhe von mehr als 10 mm, jedoch nicht mehr als 200 mm,
-einer Breite von mehr als 10 mm, jedoch nicht mehr als 250 mm,
-einer Länge von mehr als 10 mm, jedoch nicht mehr als 200 mm,
mit mindestens zwei Befestigungsbohrungen, aus den Aluminiumlegierungen ENAC-46100 oder ENAC-42100 (nach EN:1706), mit folgenden Eigenschaften:
-Porosität innen nicht mehr als 1 mm,
-Porosität außen nicht mehr als 2 mm,
-Rockwellhärte HRB 10 oder mehr,
von der bei der Herstellung von Aufhängungssystemen für Kraftfahrzeugmotoren verwendeten Art
EN
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:
-internal porosity not more than 1 mm,
-outer porosity not more than 2 mm,
-rockwell hardness HRB 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
87089997 50
CN (8 digits)
87089997
HS (6 digits)
870899
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Fri Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
TARIC
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 2Country-scoped: 0With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Fri Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Import control of fluorinated greenhouse gases
724
All origins (erga omnes)
Cond: Y cert: Y-152 (29):; Y cert: Y-986 (29):; Y cert: Y-160 (29):; Y cert: Y-169 (29):; Y (09):; YA cert: Y-123 (29):; YA cert: Y-160 (29):; YA (09):; YC cert: Y-054 (29):; YC cert: Y-160 (29):; YC (09):; YD cert: Y-163 (29):; YD cert: Y-160 (29):; YD (09):; YE cert: Y-121 (29):; YE cert: Y-160 (29):; YE (09):
Wed Jun 25 - -
Regulation 0573/24
Supplementary unit import
110
All origins (erga omnes)
NAR
Sat Jan 01 - -
Regulation 2278/21
Siblings
8708999722
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film
8708999743
Outer tie rod with a housing made of AISI 4137 (SCM435) steel or EN10083/2- C45R N steel or JIS G4053-SCM435 low alloy steel, with:
-a ball stud made of EN 10263/4 - 41CrS4 Q T steel or AISI 4137 (SCM435) steel or EN10083/3-42CrMoS4Q T steel or JIS G4053-SCM435 low alloy steel,
-a polyoxymethylene plastic ball seat,
-a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm,
-a ball stud diameter of 21,98 mm or more but no more than 22 mm,
-a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions M14x1,5,
-a boot seal,
-a boot seal protector and retaining ring,
-lubricant,
for use in the manufacture of vehicle's steering system
8708999753
Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components:
-made of aluminum, rubber, and plastic,
-with a height of 270 mm or more, but not more than 300 mm,
-with a width of 50 mm or more, but not more than 65 mm,
-with a length of 150 mm or more, but not more than 170 mm,
for use in the manufacture of motor vehicles
8708999758
Mounting bracket of front radiator or intercooler:
-made of iron or steel or of plastics,
-whether or not with rubber cushioning,
for use in the manufacture of goods of heading 8708
8708999775
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87
8708999780
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708999790
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Aluminium-Motorhalterung mit -einer Höhe von mehr als 10 mm, jedoch nicht mehr als 200 mm, -einer Breite von mehr als 10
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.