HS code / TARIC details
8507903100 - Of plastic film of a thickness not exceeding 40|micrometres
Definition & language versions
Of plastic film of a thickness not exceeding 40|micrometres
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
塑料薄膜制,厚度不超过40微米
DE
aus Kunststofffolie mit einer Dicke von 40|Mikrometern oder weniger
EN
Of plastic film of a thickness not exceeding 40|micrometres
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85079031 00
CN (8 digits)
85079031
HS (6 digits)
850790
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Thu Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Thu Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Related codes
Children
8507903110 For use in civil aircraft8507903120 Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with:
-a width of 98 mm or more but not more than 170 mm,
-a thickness of 15 µm or more but not more than 36 µm8507903130 Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm8507903140 Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with:
-one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides,
-a width of 65 mm or more but not more than 170 mm,
-a total thickness of 10 µm or more but not more than 30 µm,
-a porosity of 25 % (vol.) or more but not more than 65 % (vol.)8507903190 Other
Declarable leaf codes
8507903110 For use in civil aircraft8507903120 Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with:
-a width of 98 mm or more but not more than 170 mm,
-a thickness of 15 µm or more but not more than 36 µm8507903130 Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
-zero transversal production direction (TD) shrinkage,
-a total thickness of 8 μm or more, but not more than 40 μm,
-a width of 15 mm or more, but not more than 900 mm,
-a length of more than 200 m, but not more than 8 000 m,
-an average pore size between 0,02 μm and 0,1 μm,
-whether or not coated with surfactant,
-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
-whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm8507903140 Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with:
-one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides,
-a width of 65 mm or more but not more than 170 mm,
-a total thickness of 10 µm or more but not more than 30 µm,
-a porosity of 25 % (vol.) or more but not more than 65 % (vol.)8507903190 Other
Siblings
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
aus Kunststofffolie mit einer Dicke von 40|Mikrometern oder weniger
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.