HS code / TARIC details
8505111000 - Containing neodymium, praseodymium, dysprosium or samarium
Definition & language versions
Containing neodymium, praseodymium, dysprosium or samarium
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
含钕、镨、镝或钐
DE
Neodym, Praseodym, Dysprosium oder Samarium enthaltend
EN
Containing neodymium, praseodymium, dysprosium or samarium
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85051110 00
CN (8 digits)
85051110
HS (6 digits)
850511
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Sun Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Sun Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Related codes
Children
8505111010 For use in certain types of aircraft8505111020 Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,
-whether or not arched,
-whether or not with rounded corners or oblique sides,
-whether or not colour marked
-whether or not coated or passivated with a surface treatment,
-whether or not consisting of segments bonded together and electrically insulated from one another
with:
-a length of 9 mm or more, but not more than 105 mm,
-a width of 5 mm or more, but not more than 105 mm,
-a thickness of 2 mm or more, but not more than 55 mm
intended to become permanent magnet after magnetisation8505111023 Bars in the form of arched rectangles, containing alloy containing neodymium, with:
-a length of 15 mm or more but not more than 52 mm,
-a width of 5 mm or more but not more than 42 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111028 Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:
-with an external diameter of not more than 45 mm,
-with a height of not more than 45 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111030 Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:
-a rectangular or a trapezoidal cross-section,
-a length of not more than 140 mm,
-a width of not more than 90 mm and
-a thickness of not more than 55 mm,
or in the shape of an arched rectangle with:
-a length of not more than 75 mm,
-a width of not more than 40 mm,
-a thickness of not more than 7 mm and
-a radius of curvature of more than 86 mm but not more than 241 mm,
-layers of nickel and copper
or in the shape of a disc with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre8505111035 Article of an alloy of neodymium, in the shape of a disc, with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre,
-layers of copper, nickel and/or zinc,
intended to become permanent magnets after magnetisation8505111074 Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation8505111075 A quarter sleeve intended to become permanent magnet after magnetization,
-|consisting of at least neodymium, iron and boron,
-|with a width of 9,1|mm or more but not more than| 10,5|mm,
-|with a length of 20|mm or more but not more than 30,1|mm,
of a kind used on rotors for the manufacture of fuel pumps8505111076 Articles of an alloy of neodymium, or an alloy of samarium,
- whether or not coated or passivated with a surface treatment,
- whether or not covered with zinc,
- in the shape of rectangles,
with:
- a length of 13,8 mm or more but not more than 45,2 mm,
- a width of 7,8 mm or more but not more than 25,2 mm,
- a height of 1,3 mm or more but not more than 4,7 mm,
intended to become permanent magnets after magnetisation8505111077 Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:
- a width of 9,1 mm or more but not more than 10,5 mm,
- a length of 20 mm or more but not more than 30,1 mm,
intended to become permanent magnets after magnetization8505111078 Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:
-a length of 200 mm or more but not more than 205 mm,
-a width of 58 mm or more but not more than 62 mm,
-a height of 25 mm or more but not more than 30 mm,
with a stud mounted in the middle8505111099 Other
Declarable leaf codes
8505111010 For use in certain types of aircraft8505111020 Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,
-whether or not arched,
-whether or not with rounded corners or oblique sides,
-whether or not colour marked
-whether or not coated or passivated with a surface treatment,
-whether or not consisting of segments bonded together and electrically insulated from one another
with:
-a length of 9 mm or more, but not more than 105 mm,
-a width of 5 mm or more, but not more than 105 mm,
-a thickness of 2 mm or more, but not more than 55 mm
intended to become permanent magnet after magnetisation8505111023 Bars in the form of arched rectangles, containing alloy containing neodymium, with:
-a length of 15 mm or more but not more than 52 mm,
-a width of 5 mm or more but not more than 42 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111028 Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:
-with an external diameter of not more than 45 mm,
-with a height of not more than 45 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111030 Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:
-a rectangular or a trapezoidal cross-section,
-a length of not more than 140 mm,
-a width of not more than 90 mm and
-a thickness of not more than 55 mm,
or in the shape of an arched rectangle with:
-a length of not more than 75 mm,
-a width of not more than 40 mm,
-a thickness of not more than 7 mm and
-a radius of curvature of more than 86 mm but not more than 241 mm,
-layers of nickel and copper
or in the shape of a disc with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre8505111035 Article of an alloy of neodymium, in the shape of a disc, with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre,
-layers of copper, nickel and/or zinc,
intended to become permanent magnets after magnetisation8505111074 Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation8505111075 A quarter sleeve intended to become permanent magnet after magnetization,
-|consisting of at least neodymium, iron and boron,
-|with a width of 9,1|mm or more but not more than| 10,5|mm,
-|with a length of 20|mm or more but not more than 30,1|mm,
of a kind used on rotors for the manufacture of fuel pumps8505111076 Articles of an alloy of neodymium, or an alloy of samarium,
- whether or not coated or passivated with a surface treatment,
- whether or not covered with zinc,
- in the shape of rectangles,
with:
- a length of 13,8 mm or more but not more than 45,2 mm,
- a width of 7,8 mm or more but not more than 25,2 mm,
- a height of 1,3 mm or more but not more than 4,7 mm,
intended to become permanent magnets after magnetisation8505111077 Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:
- a width of 9,1 mm or more but not more than 10,5 mm,
- a length of 20 mm or more but not more than 30,1 mm,
intended to become permanent magnets after magnetization8505111078 Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:
-a length of 200 mm or more but not more than 205 mm,
-a width of 58 mm or more but not more than 62 mm,
-a height of 25 mm or more but not more than 30 mm,
with a stud mounted in the middle8505111099 Other
Siblings
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Neodym, Praseodym, Dysprosium oder Samarium enthaltend
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.