HS code / TARIC details
8503009800 - Other
Definition & language versions
Other
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
其他
DE
andere
EN
Other
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85030098 00
CN (8 digits)
85030098
HS (6 digits)
850300
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Wed Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 4Country-scoped: 3With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Wed Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Tariff preference
142
Mercosur
0.000 %
Fri May 01 - -
Decision 0183/26
Import control
714
Iran, Islamic Republic of
Cond: Y cert: Y-949 (29):; Y (09):
Tue Sep 30 - -
Regulation 0267/12
Import control on restricted goods and technologies
711
North Korea (Democratic People’s Republic of Korea)
Cond: Y cert: Y-920 (29):; Y (09):
Wed Jan 01 - -
Regulation 1509/17
Import control
714
All origins (erga omnes)
Cond: Y cert: Y-949 (29):; Y cert: C-067 (29):; Y cert: Y-069 (29):; Y (09):
Wed Jan 01 - -
Regulation 0267/12
Related codes
Children
8503009810 For use in certain types of aircraft8503009832 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing8503009833 Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm8503009837 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements:
- diameter of the rotor body of 15mm or more but not more than 37mm,
- length of the rotor body of 12mm or more but not more than 36mm8503009840 Pressure casted inner housing of a cooling channel system for an electrical motor:
-of EN AC-47100 aluminum,
-shot-blasted and machined,
-leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
-with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
-with a tensile strength of 190 N/mm² or more,
-with a height of 160 mm or more, but not more than 330 mm,
-with a diameter of 240 mm or more, but not more than 368 mm,
-with a weight of 3 kg or more, but not more than 5,84 kg8503009843 Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film8503009853 Pressure casted rotor cover of the cooling channel system in the electrical motor:
- of EN AC-47100-F aluminum,
- with a sealing cap of stainless steel,
- shot-blasted and machined,
- leakproof to the degree of 1ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 42mm or more, but not more than 64mm,
- with a diameter of 88mm or more, but not more than 132mm,
- with a weight of 0,3kg or more, but not more than 0,5kg8503009855 Stator for brushless motor, with:
-an internal diameter of 206,6 mm (± 0,5)
-an external diameter of 265,0 mm (± 0,2) and
-a width of 37,2 mm or more but not more than 47,8 mm
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums8503009863 Pressure casted outer housing of an electrical motor:
- of EN AC-47100 aluminum,
- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,
- shot-blasted and machined,
- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 195mm or more, but not more than 430mm,
- with a width of 290mm or more, but not more than 625mm,
- with a length of 270mm or more, but not more than 535mm,
- with a weight of 5,2kg or more, but not more than 12,5kg8503009873 Pressure die-cast electric motor stator housing:
-of EN AC-46000 aluminium,
-shot-blasted and machined,
-with a height of 70 mm or more but not more than 76 mm,
-with a width of 155 mm or more but not more than 162 mm,
-with a weight of 330 g or more but not more than 360 g8503009875 Stator body of stacked electrical sheet having:
-an inner diameter of 18 mm or more, but not more than 35 mm,
-an outer diameter of 35 mm or more, but not more than 65 mm, and
-a length of 20 mm or more, but not more than 65 mm
-whether or not incorporated in a housing8503009899 Other
Declarable leaf codes
8503009810 For use in certain types of aircraft8503009832 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing8503009833 Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm8503009837 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements:
- diameter of the rotor body of 15mm or more but not more than 37mm,
- length of the rotor body of 12mm or more but not more than 36mm8503009840 Pressure casted inner housing of a cooling channel system for an electrical motor:
-of EN AC-47100 aluminum,
-shot-blasted and machined,
-leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
-with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
-with a tensile strength of 190 N/mm² or more,
-with a height of 160 mm or more, but not more than 330 mm,
-with a diameter of 240 mm or more, but not more than 368 mm,
-with a weight of 3 kg or more, but not more than 5,84 kg8503009843 Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film8503009853 Pressure casted rotor cover of the cooling channel system in the electrical motor:
- of EN AC-47100-F aluminum,
- with a sealing cap of stainless steel,
- shot-blasted and machined,
- leakproof to the degree of 1ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 42mm or more, but not more than 64mm,
- with a diameter of 88mm or more, but not more than 132mm,
- with a weight of 0,3kg or more, but not more than 0,5kg8503009855 Stator for brushless motor, with:
-an internal diameter of 206,6 mm (± 0,5)
-an external diameter of 265,0 mm (± 0,2) and
-a width of 37,2 mm or more but not more than 47,8 mm
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums8503009863 Pressure casted outer housing of an electrical motor:
- of EN AC-47100 aluminum,
- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,
- shot-blasted and machined,
- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 195mm or more, but not more than 430mm,
- with a width of 290mm or more, but not more than 625mm,
- with a length of 270mm or more, but not more than 535mm,
- with a weight of 5,2kg or more, but not more than 12,5kg8503009873 Pressure die-cast electric motor stator housing:
-of EN AC-46000 aluminium,
-shot-blasted and machined,
-with a height of 70 mm or more but not more than 76 mm,
-with a width of 155 mm or more but not more than 162 mm,
-with a weight of 330 g or more but not more than 360 g8503009875 Stator body of stacked electrical sheet having:
-an inner diameter of 18 mm or more, but not more than 35 mm,
-an outer diameter of 35 mm or more, but not more than 65 mm, and
-a length of 20 mm or more, but not more than 65 mm
-whether or not incorporated in a housing8503009899 Other
Siblings
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
andere
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.