HS code / TARIC details
8501109950 - Electric (DC) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 W,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 Nm and ultimate torque of 200 Nm,
-a maximum current of 15 A,
-no load speed of 7 RPM or more but not more than 10 RPM,
-a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,
-a maximum noise level of 42 dB(A),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car's seats
Definition & language versions
Electric (DC) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 W,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 Nm and ultimate torque of 200 Nm,
-a maximum current of 15 A,
-no load speed of 7 RPM or more but not more than 10 RPM,
-a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,
-a maximum noise level of 42 dB(A),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car's seats
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
用于汽车座椅高度调节的直流电动机,额定输出机械功率不超过35瓦,框架集成长156毫米、高59毫米、厚36毫米、重500克,堵转扭矩45牛米,极限扭矩200牛米,最大电流15安,空载转速7-10转/分,转速4000-5600转/分,最大噪音42分贝,最大角间隙3度,8齿小齿轮模数
DE
Elektrischer (Gleichstrom-)Motor zum Antrieb einer Höhenverstellung mit
-einer mechanischen Ausgangsnennleistung von höchstens 35 W,
-einem integrierten Rahmen mit einer Länge von 156 mm, einer Höhe von 59 mm, einer Dicke von 36 mm und einem Gewicht von 500 g,
-einem Stillstandsdrehmoment von 45 Nm und einem Enddrehmoment von 200 Nm,
-einer maximalen Stromstärke von 15 A,
-einer Leerlaufdrehzahl von 7 U/min oder mehr, jedoch nicht mehr als 10 U/min,
-einer Drehzahl von 4000 U/min oder mehr, jedoch nicht mehr als 5600 U/min,
-einem maximalen Geräuschpegel von 42 dB(A),
-einem maximalen Winkelspiel von bis zu 3 Grad und
-einem Ritzelmodul mit 8 Zähnen,
zur Verwendung bei der Herstellung von Kraftfahrzeugteilen für Fahrzeugsitze
EN
Electric (DC) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 W,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 Nm and ultimate torque of 200 Nm,
-a maximum current of 15 A,
-no load speed of 7 RPM or more but not more than 10 RPM,
-a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,
-a maximum noise level of 42 dB(A),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car's seats
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85011099 50
CN (8 digits)
85011099
HS (6 digits)
850110
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Sun Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 1Country-scoped: 0With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Sun Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Declaration of subheading submitted to legal restrictions (net weight/supplementary unit)
482
All origins (erga omnes)
Cond: R 0.520/KGM(10):; R 0.480/KGM(28):; R 0.000/KGM(10):
Sun Jan 01 - -
Regulation 2583/22
Siblings
8501109910
For use in certain types of aircraft
8501109920
Worm axis motor for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with a worm wheel,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats
8501109930
Linear actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or higher but not higher than 16 V,
-with a rated output mechanical power not exceeding 20 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats
8501109940
Rotary actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats
8501109956
DC Motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 V,
- with a maximum power of 24 W,
- for a specific temperature range from -40°C to 160°C,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 Nm
8501109958
DC Motor :
-|with a speed rotation of not more than|6500|rpm (without load),
-|with a nominal| voltage of 12|V (± 4|V),
-|with a maximal power below than 20|W,
-|with a specified temperature range from -40°C to 160°C,
-|with a worm gear drive,
-|with a mechanical attachment interface,
-|with 2|electrical connections,
-|with a maximum torque of 75|Nm
8501109960
DC motor
-|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded
-|with a power supply voltage of 100|V or more but not more than 240|V
for use in the manufacture of electric fryers
8501109964
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
-with Ingress Protection (IP) standard of IP69,
-with a rotor speed of not more than 6 500 rpm when not loaded,
-with a rated voltage of 12,0 V (± 0,1),
-of a specified temperature range of - 40 °C or more but not more than 165 °C,
-with or without a connecting pinion,
-with or without an engine connector,
-with or without a flange,
-with a diameter of not more than 40 mm (not including the flange),
-with an overall height of not more than 90 mm (from the base to the pinion)
8501109965
Electric turbocharger actuator, with:
-|a DC motor,
-|an integrated gear mechanism,
-|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature,
-|a (pulling) force of 250|N or more in each position of its stroke,
-|an effective stroke of 15|mm or more but not more than 25|mm,
-|with or without an on-board diagnostics interface
8501109970
DC stepping motor, with
-|a two-phase winding,|
-|a rated voltage of 9|V or more, but not more than 16,0|V
-|of a specified temperature range covering at least|- 40|°C to +|105|°C
-|with or without connecting pinion
-|with or without motor drive connector
8501109975
Permanently excited DC motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 V or more but not more than 27 V,
- with or without a pulley,
- with or without a gear wheel
8501109979
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C
8501109990
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Elektrischer (Gleichstrom-)Motor zum Antrieb einer Höhenverstellung mit -einer mechanischen Ausgangsnennleistung von höc
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.