HS code / TARIC details
8501109900 - DC motors
Definition & language versions
DC motors
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
直流电动机
DE
Gleichstrommotoren
EN
DC motors
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85011099 00
CN (8 digits)
85011099
HS (6 digits)
850110
Updated at
Mon Aug 31
Duty
Duty rate (import)
2.700%
Effective from
Fri Jan 01
Legal base
Regulation 2261/98
Validity & quantity
Start date
Sat Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 1Country-scoped: 1With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
2.700%
Effective from Fri Jan 01
Legal base
Regulation 2261/98
-
Supplementary unit
Not required
Validity: Sat Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Tariff preference
142
Mercosur
0.000 %
Fri May 01 - -
Decision 0183/26
Related codes
Children
8501109910 For use in certain types of aircraft8501109920 Worm axis motor for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with a worm wheel,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109930 Linear actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or higher but not higher than 16 V,
-with a rated output mechanical power not exceeding 20 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109940 Rotary actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109950 Electric (DC) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 W,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 Nm and ultimate torque of 200 Nm,
-a maximum current of 15 A,
-no load speed of 7 RPM or more but not more than 10 RPM,
-a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,
-a maximum noise level of 42 dB(A),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car's seats8501109956 DC Motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 V,
- with a maximum power of 24 W,
- for a specific temperature range from -40°C to 160°C,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 Nm8501109958 DC Motor :
-|with a speed rotation of not more than|6500|rpm (without load),
-|with a nominal| voltage of 12|V (± 4|V),
-|with a maximal power below than 20|W,
-|with a specified temperature range from -40°C to 160°C,
-|with a worm gear drive,
-|with a mechanical attachment interface,
-|with 2|electrical connections,
-|with a maximum torque of 75|Nm8501109960 DC motor
-|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded
-|with a power supply voltage of 100|V or more but not more than 240|V
for use in the manufacture of electric fryers8501109964 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
-with Ingress Protection (IP) standard of IP69,
-with a rotor speed of not more than 6 500 rpm when not loaded,
-with a rated voltage of 12,0 V (± 0,1),
-of a specified temperature range of - 40 °C or more but not more than 165 °C,
-with or without a connecting pinion,
-with or without an engine connector,
-with or without a flange,
-with a diameter of not more than 40 mm (not including the flange),
-with an overall height of not more than 90 mm (from the base to the pinion)8501109965 Electric turbocharger actuator, with:
-|a DC motor,
-|an integrated gear mechanism,
-|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature,
-|a (pulling) force of 250|N or more in each position of its stroke,
-|an effective stroke of 15|mm or more but not more than 25|mm,
-|with or without an on-board diagnostics interface8501109970 DC stepping motor, with
-|a two-phase winding,|
-|a rated voltage of 9|V or more, but not more than 16,0|V
-|of a specified temperature range covering at least|- 40|°C to +|105|°C
-|with or without connecting pinion
-|with or without motor drive connector8501109975 Permanently excited DC motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 V or more but not more than 27 V,
- with or without a pulley,
- with or without a gear wheel8501109979 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C8501109990 Other
Declarable leaf codes
8501109910 For use in certain types of aircraft8501109920 Worm axis motor for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with a worm wheel,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109930 Linear actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or higher but not higher than 16 V,
-with a rated output mechanical power not exceeding 20 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109940 Rotary actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501109950 Electric (DC) motor powering height adjusting with:
-a rated output mechanical power not exceeding 35 W,
-frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,
-a stall torque of 45 Nm and ultimate torque of 200 Nm,
-a maximum current of 15 A,
-no load speed of 7 RPM or more but not more than 10 RPM,
-a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,
-a maximum noise level of 42 dB(A),
-a maximum angular backlash up to 3 degrees, and
-a 8 tooth pinion module,
for use in the manufacture of automotive components for car's seats8501109956 DC Motor:
- with a speed rotation of not more than 7 000 rpm without load,
- with a nominal voltage of not more than 18 V,
- with a maximum power of 24 W,
- for a specific temperature range from -40°C to 160°C,
- with or without a gear connection,
- with or without a mechanical attachment interface,
- with 2 electrical connections,
- with a maximum torque of 100 Nm8501109958 DC Motor :
-|with a speed rotation of not more than|6500|rpm (without load),
-|with a nominal| voltage of 12|V (± 4|V),
-|with a maximal power below than 20|W,
-|with a specified temperature range from -40°C to 160°C,
-|with a worm gear drive,
-|with a mechanical attachment interface,
-|with 2|electrical connections,
-|with a maximum torque of 75|Nm8501109960 DC motor
-|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded
-|with a power supply voltage of 100|V or more but not more than 240|V
for use in the manufacture of electric fryers8501109964 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
-with Ingress Protection (IP) standard of IP69,
-with a rotor speed of not more than 6 500 rpm when not loaded,
-with a rated voltage of 12,0 V (± 0,1),
-of a specified temperature range of - 40 °C or more but not more than 165 °C,
-with or without a connecting pinion,
-with or without an engine connector,
-with or without a flange,
-with a diameter of not more than 40 mm (not including the flange),
-with an overall height of not more than 90 mm (from the base to the pinion)8501109965 Electric turbocharger actuator, with:
-|a DC motor,
-|an integrated gear mechanism,
-|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature,
-|a (pulling) force of 250|N or more in each position of its stroke,
-|an effective stroke of 15|mm or more but not more than 25|mm,
-|with or without an on-board diagnostics interface8501109970 DC stepping motor, with
-|a two-phase winding,|
-|a rated voltage of 9|V or more, but not more than 16,0|V
-|of a specified temperature range covering at least|- 40|°C to +|105|°C
-|with or without connecting pinion
-|with or without motor drive connector8501109975 Permanently excited DC motor with
- a multiple-phase winding,
- an external diameter of 24 mm or more but not more than 38 mm,
- a rated speed of not more than 12 000 rpm,
- a power supply voltage of 8 V or more but not more than 27 V,
- with or without a pulley,
- with or without a gear wheel8501109979 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C8501109990 Other
Siblings
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Gleichstrommotoren
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.