HS code / TARIC details
8501101020 - Synchronous motor for a dishwasher with a water flow control mechanism with
-|a length without axle of 24|mm (+/- 0,3),
-|a diameter of 49,3|mm (+/- 0,3)
-|a rated voltage of 220|V AC or more but not more than 240|V AC,
-|a rated frequency of 50|Hz or more but not more than 60|Hz,
-|an input power of not more than 4|W,
-|a rotation speed of 4rpm or more but not more than 4,8rpm,
-|an output torque of not less than 10kgf/cm
Definition & language versions
Synchronous motor for a dishwasher with a water flow control mechanism with
-|a length without axle of 24|mm (+/- 0,3),
-|a diameter of 49,3|mm (+/- 0,3)
-|a rated voltage of 220|V AC or more but not more than 240|V AC,
-|a rated frequency of 50|Hz or more but not more than 60|Hz,
-|an input power of not more than 4|W,
-|a rotation speed of 4rpm or more but not more than 4,8rpm,
-|an output torque of not less than 10kgf/cm
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
洗碗机用水流控制同步电动机,无轴长24毫米,直径49.3毫米,额定电压220-240伏交流,额定频率50-60赫兹,输入功率不超过4瓦,转速4-4.8转/分,输出扭矩不小于10千克力/厘米
DE
Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit
-|einer Länge ohne Achse von 24|mm (±|0,3)
-|einem Durchmesser von 49,3|mm (±|0,3)
-|einer Nennspannung von 220|V Wechselstrom oder mehr, jedoch nicht mehr als 240|V Wechselstrom
-|einer Nennfrequenz von 50|Hz oder mehr, jedoch nicht mehr als 60|Hz
-|einer Eingangsleistung von nicht mehr als 4|W
-|einer Drehzahl von 4|U/min oder mehr, jedoch nicht mehr als 4,8|U/min
-|einem Ausgangsdrehmoment von nicht weniger als 10 kgf/cm
EN
Synchronous motor for a dishwasher with a water flow control mechanism with
-|a length without axle of 24|mm (+/- 0,3),
-|a diameter of 49,3|mm (+/- 0,3)
-|a rated voltage of 220|V AC or more but not more than 240|V AC,
-|a rated frequency of 50|Hz or more but not more than 60|Hz,
-|an input power of not more than 4|W,
-|a rotation speed of 4rpm or more but not more than 4,8rpm,
-|an output torque of not less than 10kgf/cm
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
85011010 20
CN (8 digits)
85011010
HS (6 digits)
850110
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Fri Jul 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Fri Jul 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8501101010
For use in certain types of aircraft
8501101040
Synchronous hybrid stepper motor with:
-an output not exceeding 18 W,
-two phases,
-a rated current of not more than 2,5 A/phase,
-a rated voltage of not more than 20 V,
-with or without a threaded shaft,
for use in the manufacture of 3D printers
8501101050
Linear actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or higher but not higher than 16 V,
-with a rated output mechanical power not exceeding 20 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats
8501101060
Rotary actuator for automotive electric seat adjustment applications:
-consisting of a permanently excited DC motor with an integrated gear mechanism,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 35 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats
8501101090
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Synchronmotor für Geschirrspülmaschinen mit Wasserfluss-Steuerungsmechanismus mit -|einer Länge ohne Achse von 24|mm (±|
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.