HS code / TARIC details
8483109540 - Stepped shaft made of carbon steel with:
-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',
-a largest diameter of 16 mm or more, but not more than 18 mm,
-a length of 137 mm or more, but not more than 155 mm,
-a weight of 0,12 kg or more, but not more than 0,28 kg
Definition & language versions
Stepped shaft made of carbon steel with:
-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',
-a largest diameter of 16 mm or more, but not more than 18 mm,
-a length of 137 mm or more, but not more than 155 mm,
-a weight of 0,12 kg or more, but not more than 0,28 kg
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
碳钢阶梯轴,带滚轧渐开线花键端,螺旋角0°15.5'-0°21.5',最大直径16-18mm,长度137-155mm,重量0.12-0.28kg
DE
Stufenwelle aus Kohlenstoffstahl mit:
-gewalztem Keilwellenende mit Evolventenprofil, mit einem Steigungswinkel von 0°15,5' oder mehr, jedoch nicht mehr als 0°21,5',
-einem größten Durchmesser von 16 mm oder mehr, jedoch nicht mehr als 18 mm,
-einer Länge von 137 mm oder mehr, jedoch nicht mehr als 155 mm,
-einem Gewicht von 0,12 kg oder mehr, jedoch nicht mehr als 0,28 kg
EN
Stepped shaft made of carbon steel with:
-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',
-a largest diameter of 16 mm or more, but not more than 18 mm,
-a length of 137 mm or more, but not more than 155 mm,
-a weight of 0,12 kg or more, but not more than 0,28 kg
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
84831095 40
CN (8 digits)
84831095
HS (6 digits)
848310
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Wed Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Wed Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8483109510
For use in civil aircraft
8483109530
Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:
-external toothing in a diametral pitch standard,
-17 teeth or more, but not more than 50 teeth,
-a diameter of 35 mm or more, but not more than 145 mm,
-a length of 200 mm or more, but not more than 1345 mm,
-a hardness of 35 HRC or more, but not more than 45 HRC
8483109550
Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with:
-a length of 137,8 mm or more but not more than 138,2 mm,
-an outer diameter of 23 mm or more but not more than 48,025 mm,
-a weight of 1,0245 kg or more but not more than 1,0445 kg,
-a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC,
-a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB,
-an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
8483109590
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Stufenwelle aus Kohlenstoffstahl mit: -gewalztem Keilwellenende mit Evolventenprofil, mit einem Steigungswinkel von 0°15
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.