SendLabel
Create accountSign in
HomeCreate LabelE-Invoice CheckNewExport CustomsFreight QuotePricingReturn LabelsTrackingHS CodeHelpAPI Docs
You can create labels without registration, but addresses won’t be saved. Create an account to reuse saved addresses.
Back to HS search
HS code / TARIC details
8483109530 - Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
DeclarableNo supplementary unitDuty hint: 0.000%Official TARIC lookup
Definition & language versions
Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
合金钢花键轴（扭矩轴）,直齿渐开线,径节标准外花键,17-50齿,直径35-145mm,长度200-1345mm,硬度35-45HRC
DE
Keilwelle (Torsionswelle) aus Stahllegierung mit Geradverzahnung und Evolventenprofil mit -Außenverzahnung in einem Diametral-Pitch-Standard, -17 Zähnen oder mehr, jedoch nicht mehr als 50 Zähnen, -einem Durchmesser von 35 mm oder mehr, jedoch nicht mehr als 145 mm, -einer Länge von 200 mm oder mehr, jedoch nicht mehr als 1345 mm, -einer Härte von 35 HRC oder mehr, jedoch nicht mehr als 45 HRC
EN
Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
84831095 30
CN (8 digits)
84831095
HS (6 digits)
848310
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Mon Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
8400000000- NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
TARIC
8483000000- Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
TARIC
8483100000- Transmission shafts (including cam shafts and crank shafts) and cranks
TARIC
8483109500- Other
TARIC
8483109530- Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Open official TARIC
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Mon Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8483109510
For use in civil aircraft
8483109540
Stepped shaft made of carbon steel with:  -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg
8483109550
Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: -a length of 137,8 mm or more but not more than 138,2 mm, -an outer diameter of 23 mm or more but not more than 48,025 mm, -a weight of 1,0245 kg or more but not more than 1,0445 kg, -a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, -a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
8483109590
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
New code
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Keilwelle (Torsionswelle) aus Stahllegierung mit Geradverzahnung und Evolventenprofil mit -Außenverzahnung in einem Diam
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.
Create international shipmentOpen customs form