HS code / TARIC details
8481805930 - Two-way flow control valve with housing, with:
- at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,
- at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate,
- at least 19, but not more than 300 MPa operating pressure
Definition & language versions
Two-way flow control valve with housing, with:
- at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,
- at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate,
- at least 19, but not more than 300 MPa operating pressure
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
双向流量控制阀
DE
Zweiwege-Durchflussregelventil mit Gehäuse, mit:
- 5 oder mehr, jedoch nicht mehr als 16 Auslassöffnungen mit einem Durchmesser von 0,05 mm oder mehr, jedoch nicht mehr als 0,5 mm,
- einer Durchflussrate von 330 cm³/Minute oder mehr, jedoch nicht mehr als 5000 cm³/Minute,
- einem Betriebsdruck von 19 MPa oder mehr, jedoch nicht mehr als 300 MPa
EN
Two-way flow control valve with housing, with:
- at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,
- at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate,
- at least 19, but not more than 300 MPa operating pressure
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
84818059 30
CN (8 digits)
84818059
HS (6 digits)
848180
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Sun Jul 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Sun Jul 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8481805920
Pressure regulating|valve for incorporation into|compressors of motor vehicle air condition|units
8481805940
Flow-control valve
-|made of steel,
-|with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5|mm,
-|with an inlet hole with a diameter of at least 0,1|mm, but not more than 1,3|mm,
-|with chromium nitride coating,
-|with a surface roughness of Rp 0,4
8481805950
Electromagnetic valve for quantity control with
-|a plunger,
-|a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2|Ohm
8481805960
Electromagnetic valve for quantity control
- with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
8481805970
Flow-control valve
-made of steel,
-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
8481805980
Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump:
-with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector,
-with an operating pressure of not more than 5.5 bar,
-with an operating voltage of 9 VDC or more but not more than 16 VDC,
-with a valve's base width of 22 mm or more but not more than 27 mm,
-with a valve's length of 55 mm or more but not more than 110 mm,
for use in the manufacture of motor vehicle engines
8481805990
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Zweiwege-Durchflussregelventil mit Gehäuse, mit: - 5 oder mehr, jedoch nicht mehr als 16 Auslassöffnungen mit einem Durc
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.