HS code / TARIC details
8415900045 - Aluminium connecting block for automotive air conditioning systems:
-with a T6 hardening,
-equipped with round stubs with a circumferential outer groove,
-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,
-with a distance between holes of 15 mm or more but not more than 22 mm,
-with sockets designed for brazing or clamping,
-with mounting holes for M6 or M8 mounting screw, threaded or not,
-with a width of 5 mm or more but not more than 16 mm,
-for connecting a compressor, a condenser, an evaporator, a chiller and other lines
Definition & language versions
Aluminium connecting block for automotive air conditioning systems:
-with a T6 hardening,
-equipped with round stubs with a circumferential outer groove,
-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,
-with a distance between holes of 15 mm or more but not more than 22 mm,
-with sockets designed for brazing or clamping,
-with mounting holes for M6 or M8 mounting screw, threaded or not,
-with a width of 5 mm or more but not more than 16 mm,
-for connecting a compressor, a condenser, an evaporator, a chiller and other lines
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
汽车空调铝连接块,T6硬化,带环形槽圆接头,通孔或盲孔,上半径8-11mm,下半径12-17mm,孔间距15-22mm,焊接或夹紧插座,M6/M8安装孔,宽5-16mm,用于连接压缩机、冷凝器、蒸发器、冷却器等管路
DE
Anschlussstück aus Aluminium für Klimaanlagen von Kraftfahrzeugen
-mit T6-Härtung,
-mit abgerundeten Stutzen mit einer umlaufenden äußeren Nut,
-mit durchgehenden oder nicht durchgehenden Öffnungen, aus Profilen mit einem oberen Radius von 8 mm oder mehr, jedoch nicht mehr als 11 mm, und einem unteren Radius von 12 mm oder mehr, jedoch nicht mehr als 17 mm,
-mit einem Abstand zwischen den Öffnungen von 15 mm oder mehr, jedoch nicht mehr als 22 mm,
-mit Anschlussstutzen zum Löten oder Klemmen,
-mit Montageöffnungen für M6- oder M8-Montageschrauben, mit oder ohne Gewinde,
-mit einer Breite von 5 mm oder mehr, jedoch nicht mehr als 16 mm,
-zum Anschluss eines Kompressors, Kondensators, Verdampfers, Kühlers und anderer Leitungen
EN
Aluminium connecting block for automotive air conditioning systems:
-with a T6 hardening,
-equipped with round stubs with a circumferential outer groove,
-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,
-with a distance between holes of 15 mm or more but not more than 22 mm,
-with sockets designed for brazing or clamping,
-with mounting holes for M6 or M8 mounting screw, threaded or not,
-with a width of 5 mm or more but not more than 16 mm,
-for connecting a compressor, a condenser, an evaporator, a chiller and other lines
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
84159000 45
CN (8 digits)
84159000
HS (6 digits)
841590
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Sat Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Sat Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8415900010
Of air conditioning machines of subheading Nos 8415|81, 8415|82|or 8415|83, for use in civil aircraft
8415900015
Electrically welded manifolds for the condenser in automotive air conditioning systems:
-consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,
-containing internal baffles responsible for the proper flow of coolant,
-with a length of 190 mm or more, but not more than 460 mm,
-with a diameter of 9 mm or more, but not more than 42 mm,
-with a weight of 0,01 kg or more, but not more than 0,45 kg,
-whether or not having aluminium connection blocks,
used in the production of air conditioning systems in vehicles of Chapter 87
8415900060
Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:
-extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,
-a weight of 0,02 kg or more but not more than 0,25 kg
8415900091
Pre-charged with hydrofluorocarbons (HFCs)
8415900099
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Anschlussstück aus Aluminium für Klimaanlagen von Kraftfahrzeugen -mit T6-Härtung, -mit abgerundeten Stutzen mit einer u
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.