HS code / TARIC details
7410210055 - Plates:
- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a comparative tracking index (CTI) of 600 or more
Definition & language versions
Plates:
- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a comparative tracking index (CTI) of 600 or more
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
覆铜板,至少一层玻璃纤维布浸渍环氧树脂,单面或双面覆铜箔（厚度不超过0.15毫米）,介电常数小于5.4（1MHz）,损耗角正切小于0.035（1MHz）,相比漏电起痕指数≥600
DE
Platten,
— bestehend aus mindestens einer Schicht Glasfasergewebe, mit Epoxidharz imprägniert,
— ein- oder beidseitig beschichtet mit einer Kupferfolie mit einer Dicke von nicht mehr als 0,15 mm,
— mit einer Dielektrizitätskonstante von weniger als 5,4 bei 1 MHz, gemessen nach IPC-TM-650 2.5.5.2,
— mit einer Verlusttangente von weniger als 0,035 bei 1 MHz, gemessen nach IPC-TM-650 2.5.5.2,
— mit einer Kriechstromfestigkeit von 600 oder mehr
EN
Plates:
- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a comparative tracking index (CTI) of 600 or more
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
74102100 55
CN (8 digits)
74102100
HS (6 digits)
741021
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2614/25
Validity & quantity
Start date
Fri Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 1Country-scoped: 0With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2614/25
-
Supplementary unit
Not required
Validity: Fri Jan 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Supplementary unit import
110
All origins (erga omnes)
MTK
Sat Jan 01 - -
Regulation 2283/21
Siblings
7410210010
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
7410210020
Foils, rolls composed of one layer of glass epoxy of 100|µm colaminated with refined copper foil on one or two sides of 35|µm with a tolerance of 10|% for use in the production of smart cards
7410210030
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
7410210040
Sheet or plates:
-|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
-|consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0,15|mm
7410210050
Plates:
-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,
-covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and
-with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650
7410210090
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Platten, — bestehend aus mindestens einer Schicht Glasfasergewebe, mit Epoxidharz imprägniert, — ein- oder beidseitig be
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.