HS code / TARIC details
7410210010 - Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
Definition & language versions
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
聚四氟乙烯板或片,含氧化铝或二氧化钛填料或玻璃纤维布增强,两面覆铜箔
DE
Tafeln oder Platten aus Polytetrafluorethylen, Aluminiumoxid oder Titandioxid als Füllstoff enthaltend oder mit Glasfasergewebe verstärkt, auf beiden Seiten mit einer Kupferfolie versehen
EN
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
74102100 10
CN (8 digits)
74102100
HS (6 digits)
741021
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Sat Jul 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Sat Jul 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
7410210020
Foils, rolls composed of one layer of glass epoxy of 100|µm colaminated with refined copper foil on one or two sides of 35|µm with a tolerance of 10|% for use in the production of smart cards
7410210030
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
7410210040
Sheet or plates:
-|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
-|consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0,15|mm
7410210050
Plates:
-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,
-covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and
-with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650
7410210055
Plates:
- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,
- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,
- with a comparative tracking index (CTI) of 600 or more
7410210090
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Tafeln oder Platten aus Polytetrafluorethylen, Aluminiumoxid oder Titandioxid als Füllstoff enthaltend oder mit Glasfase
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.