HS code / TARIC details
4802540000 - Weighing less than 40|g/m$2
Definition & language versions
Weighing less than 40|g/m$2
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
每平方米重量小于40克
DE
mit einem Quadratmetergewicht von weniger als 40|g
EN
Weighing less than 40|g/m$2
Classification hints
This code is likely an intermediate category. Practical filing usually requires a more specific leaf code.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
48025400 00
CN (8 digits)
48025400
HS (6 digits)
480254
Updated at
Mon Aug 31
Duty
Duty rate (import)
-
Effective from
-
Legal base
-
Validity & quantity
Start date
Tue Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
-
-
Legal base
-
-
Supplementary unit
Not required
Validity: Tue Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Related codes
Children
4802540010 Decor paper with the following characteristics
- weighing 30 g/m² or more; having an ash content between 5% and 50%;
- having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;
- having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres;
- having a Gurley porosity of 3 to 80 seconds per 100 millilitres;
- having a smoothness of 20 to 300 according to the Bekk method;
- in reels with a width up to 300 centimetres;
- whether or not pre-impregnated with a combination of latices or natural binders (like starch);
- excluding wallpaper and similar wallcoverings;
- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).4802540090 Other
Declarable leaf codes
4802540010 Decor paper with the following characteristics
- weighing 30 g/m² or more; having an ash content between 5% and 50%;
- having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%;
- having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres;
- having a Gurley porosity of 3 to 80 seconds per 100 millilitres;
- having a smoothness of 20 to 300 according to the Bekk method;
- in reels with a width up to 300 centimetres;
- whether or not pre-impregnated with a combination of latices or natural binders (like starch);
- excluding wallpaper and similar wallcoverings;
- excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).4802540090 Other
Siblings
4802100000
Handmade paper and paperboard
4802200000
Paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper or paperboard
4802400000
Wallpaper base
4802550000
Weighing 40|g/m$2|or more but not more than 150|g/m$2, in rolls
4802560000
Weighing 40|g/m$2|or more but not more than 150|g/m$2, in sheets with one side not exceeding 435|mm and the other side not exceeding 297|mm in the unfolded state
4802570000
Other, weighing 40|g/m$2|or more but not more than 150|g/m$2
4802580000
Weighing more than 150|g/m$2
4802610000
In rolls
4802620000
In sheets with one side not exceeding 435|mm and the other side not exceeding 297|mm in the unfolded state
4802690000
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
mit einem Quadratmetergewicht von weniger als 40|g
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.