Microspheres of a polymer of divinylbenzene, of a diameter of 4,5|µm or more but not more than 80|µm

Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: -a density of 20 kg/m³ or more, but not more than 40 kg/m³, -a tensile strength of not less than 170 kPa, -water absorption coefficient of not greater than 1 %, -a length of 5 mm or more but not more than 300 mm, -a height of 10 mm or more but not more than 400 mm, -a depth of 5 mm or more but not more than 250 mm

Plastic cover with clips|for the exterior rear-view mirror of motor vehicles

Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle|and the base of a rear-view mirror

Parts of car radio and car air-conditioner front panels -|of acrylonitrile-butadiene-styrene with or without polycarbonate, -|coated with a copper, a nickel and a chrome layers, -|with a total thickness of coating of 5,54|μm or more but not more than 49,6|μm

Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls

Silicone shell for breast implant

Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm

Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705

Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems

Sheath contraceptives of polyurethane

Silicone decoupling ring with an inner diameter of 14,7mm or more but no more than 16,0mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems

Other