HS code / TARIC details
8481900080 - Flow-control valve
-made of steel,
-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
Definition & language versions
Flow-control valve
-made of steel,
-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
流量控制阀,钢制,出口孔直径0.05至0.5毫米,入口孔直径0.1至1.3毫米
DE
Durchflussregelventil
-aus Stahl
-mit einer Auslassöffnung mit einem Durchmesser von 0,05 mm oder mehr, jedoch nicht mehr als 0,5 mm,
-mit einer Einlassöffnung mit einem Durchmesser von 0,1 mm oder mehr, jedoch nicht mehr als 1,3 mm
EN
Flow-control valve
-made of steel,
-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
84819000 80
CN (8 digits)
84819000
HS (6 digits)
848190
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Fri Jan 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Fri Jan 01 - -
Imported TARIC measures
No detailed TARIC measures are available for this code in the current import yet. Use the summary above and verify against the official TARIC page.
Siblings
8481900010
For use in certain types of aircraft
8481900025
Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features:
-high-pressure die-cast aluminium EN AC-46000,
-shot-blasted and machined,
-height of 100 mm or more but not exceeding 135 mm,
-width of 115 mm or more but not exceeding 150 mm,
-weight of 210 g or more but not more than 500 g
8481900040
Valve armature:
-|for the opening and closing of the flow of fuel,
-|consisting of a shaft and a blade,
-|with at least 3 but not more than 8 holes on the blade,
-|made of metal and/or metal alloy(s)
8481900050
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film
8481900060
Nozzle body for the regulation of angle and distribution of fuel injection:
-of a cylindrical shape,
-made of stainless steel,
-with 4 or more, but not more than 16 holes,
-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
8481900070
Nozzle needle for opening and closing the flow of fuel in the engine, with:
-2 holes,
-4 grooves,
-a diameter of 3 mm or more, but not more than 6 mm,
-a length of 25 mm or more, but not more than 35 mm,
-made of stainless steel with hard-chrome plating
8481900090
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Durchflussregelventil -aus Stahl -mit einer Auslassöffnung mit einem Durchmesser von 0,05 mm oder mehr, jedoch nicht meh
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.