HS code / TARIC details
3920992865 - Matt, thermoplastic polyurethane foil in rolls with:
-|a width of 1640|mm| (± 10|mm),
-|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457),
-|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287),
-|a thickness of more than 365|µm but not more than 760|µm,
-|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)),
-|an elongation to break of 470|% (as determined by the method: EN|ISO|527)
Definition & language versions
Matt, thermoplastic polyurethane foil in rolls with:
-|a width of 1640|mm| (± 10|mm),
-|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457),
-|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287),
-|a thickness of more than 365|µm but not more than 760|µm,
-|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)),
-|an elongation to break of 470|% (as determined by the method: EN|ISO|527)
Tip: confirm material, use and finished-product form first, then compare hierarchy and declarable candidates below.
ZH
哑光热塑性聚氨酯薄膜,卷状,宽1640毫米±10毫米,光泽度3.3-3.8°,表面粗糙度1.9-2.8Ra,厚度>365-760微米,硬度90±4 Shore A,断裂伸长率470%
DE
Matte thermoplastische Polyurethanfolie, in Rollen, mit :
-|einer Breite von 1640|mm (±|10|mm),
-|einem Glanz von 3,3° oder mehr, jedoch nicht mehr als 3,8° (nach ASTM D2457),
-|einer Oberflächenrauheit von 1,9|Ra oder mehr, jedoch nicht mehr als 2,8|Ra (nach ISO|4287),
-|einer Dicke von mehr als 365|µm, jedoch nicht mehr als 760|µm
-|einer Härte von 90|(± 4) (nach dem Shore-A-Verfahren (ASTM D2240)),
-|einer Bruchreißdehnung von 470|% (nach EN ISO 527)
EN
Matt, thermoplastic polyurethane foil in rolls with:
-|a width of 1640|mm| (± 10|mm),
-|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457),
-|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287),
-|a thickness of more than 365|µm but not more than 760|µm,
-|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)),
-|an elongation to break of 470|% (as determined by the method: EN|ISO|527)
Classification hints
This code appears to be a directly declarable leaf candidate and can be used for the next customs-filing step.
Please check validity dates and duty effective dates, as the applicable rule may depend on the filing date.
Codes
TARIC
39209928 65
CN (8 digits)
39209928
HS (6 digits)
392099
Updated at
Mon Aug 31
Duty
Duty rate (import)
0.000%
Effective from
Thu Jan 01
Legal base
Regulation 2605/25
Validity & quantity
Start date
Wed Jul 01
End date
-
Supplementary unit
Not required
Code hierarchy
TARIC
Trade measures and restrictions
This block shows a filing-oriented summary first, then imported TARIC measures including scope, add. codes, order numbers, duty expressions and legal bases.
Imported measures: 1Country-scoped: 0With add. code/order: 0
Measure
Current value
Notes / validity
Reference import duty
0.000%
Effective from Thu Jan 01
Legal base
Regulation 2605/25
-
Supplementary unit
Not required
Validity: Wed Jul 01 - -
Imported TARIC measures
Measure
Scope
Duty / codes
Validity
Legal base
Supplementary unit import
110
All origins (erga omnes)
MTK
Sat Jan 01 - -
Regulation 2278/21
Siblings
3920992840
Polymer film containing the following monomers:
-|poly (tetramethylene ether glycol),
-|bis (4-isocyanotocyclohexyl) methane,
-|1,4-butanediol or 1,3-butanediol,
-|with a thickness of 0,25|mm or more but not more than 5,0|mm,
-|embossed with a regular pattern on one surface,
-|and covered with a release sheet
3920992850
Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm
3920992870
Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:
-|microspheres with a coating of metal, whether or not alloyed with gold,
-|an adhesive layer,
-|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,|
-|with a protective layer of poly(ethylene terephthalate) on the other side, and
-|with a width of 5|cm or more but not more than 100|cm
-|with a length of not more than 2|000|m
3920992890
Other
This page provides public lookup and helper information only and is not customs/tax/legal advice. Official TARIC/EZT sources prevail.
TARIC change hints
After a monthly TARIC update, this block shows a hint about text changes versus the previous snapshot.
Source: internal TARIC diff (hint only)
Previous
No previous text
→
Current
Matte thermoplastische Polyurethanfolie, in Rollen, mit : -|einer Breite von 1640|mm (±|10|mm), -|einem Glanz von 3,3° o
Type: newSource lang: EN+DE
Next actions
If this code looks suitable for your product, continue with shipment creation or customs-entry forms.